BeStar Technologies has released a new series of coin cell batteries for outdoor applications and higher temperature environments. The Sener BR series chemistry has a higher operating temperature range (-40C to +85C) than their standard and high capacity CR type coin cell batteries and they are RoHS compliant. The BR series are the same size and are interchangeable with CR battery sizes. Current part numbers in production are:
SBR2032 – 3 volt, nominal capacity is 195 mAh
SBR2540 – 3 volt, nominal capacity is 500 mAh
SBR1225 – 3 volt, nominal capacity is 50 mAh
SBR1632 – 3 volt, nominal capacity is 130 mAh
Typical applications for these batteries include automotive, portable equipment and outdoor electronics. More detailed specifications are available on request, please contact us for application assistance.
LEDtronics has introduced a new series of high lumen T5 LED bulbs. These are available in a variety of base styles including 12mm Candelabra Screw, 14mm European Screw, 15mm Dual Contact Bayonet, 15mm Single Contact Bayonet and 17mm Intermediate Screw. They are compact in size with high lumen omnidirectional output, energy savings of up to 90% and they run on 10-30VDC.
Typical applications include machine status indicators, accent lighting, decorative lighting, appliance bulbs and chandeliers. You can view these new lamps here.
Please contact us for samples for qualified applications!
BeStar is pleased to announce their 3mm diameter Electret Condenser Microphone (ECM), their ﬁrst to provide full bandwidth, high sensitivity and high signal to noise ratio all in a small 3mm package.
At this size, the HBO0302C is also comparable to the smallest MEMS microphone packages in the market. Compared to MEMS microphones however, the HBO0302C provides unique advantages with better low frequency noise performance. That’s the reason most of the advanced active noise cancelling (ANC) headsets or earphones in the market use ECM’s.
The small 3mm size is 50% smaller than commonly used 4mm ECM’s and it is available with wires for ease of application. It can also be customized for your application.
Please see the datasheet:
Please contact us for samples and application assistance!
Latest Generation LED Rope Light Eliminates All the Disadvantages of Neon Lights
LEDtronics® introduces their latest generation LED Rope Light, a safer and more energy-efficient replacement for antiquated neon sign lights. No need to worry about flickering, frequent burnouts, or broken glass with these new lights.
The RNLD02SM series’ pliable design conforms to most applications. It offers better night visibility with perimeter or border lighting for store fronts, strip malls, restaurants, and commercial and office buildings. They are also ideal for escalator and elevator lighting, signage letters, and accent lighting for staircases, pathways, cabinets, counters, landscaping, and more.
Some of the disadvantages of the outdated neon lights are heat, buzzing, flickering, UV radiation, RF interference, and ballast failures. Even worse issues are hazards such as shards of glass and toxic mercury vapor from broken tubes. Not only do the LED rope lights eliminate all of those shortcomings, but they also reduce power usage by up to 50 percent with their low power consumption of only 9.6 watts per meter.
Read the complete Product Release at:
Please contact us for application assistance with your lighting project!
ECE’s new GQ series relay is now UL Approved. It is specifically made for HVAC, Lighting Controls, Motor Controls, Smart Home and Building Automation. It’s the next revolution in 16A relays offering space and energy savings along with cost savings.
Standard features include:
- UL Class F Standard
- 16A/277VAC 50,000 Operations at 105C
- AgSnO + In contacts for inrush
- TV-8 compliance
If now is time to redesign a NEW PCB control board consider the brand new GQ 16A as it reduces 50% of the space required on your PCB compared to today’s standards.
The above double layout drawing shows the GQ verses the RT/HF115 standard size. Please contact us for samples and application assistance!
E-Mark ball top test points are designed for fast, consistent testing and connection of SMT assemblies. Two heights of test points available and they are supplied loose or on tape and reel for production applications using pick and place equipment.
You can see the catalog details on these on E-Mark Catalog Page 5.
All E-Mark test points are RoHS and REACH compliant. Please contact us for evaluation samples and application assistance.