LEDtronics – New 28VDC Flashing Red BeaconLED

LEDtronics has added a new 28VDC flashing red E26 base LED beacon lamp to their lineup of 120VAC flashing beacon LEDs.  This is suitable for use in many industrial machine status stack/tower lights and other signal indicator style fixtures.  You can see details on the BBL504-0ER-028B-FL at:

LED Flashing Beacon Light Bulbs

A summary page showing all available BeaconLED base style, color and voltage options from LEDtronics is located at:

LED Beacon Light Bulbs

LEDtronics – Explosion & Weather-Proof LED Flood Lights

LEDtronics introduces its new industrial-grade Explosion & Weather-Proof LED Flood Lighting that meets explosion proof grade Class 1, Div. 2, Groups A, B, C, and D.  This new series of LED flood lights feature:

  • 5-Year LEDtronics U.S. Factory Warranty
  • UL / cUL Listed, UL844 / E475887, Suitable for Hazardous Locations
  • Energy Savings up to 75% over MH/HPS
  • Lumen Maintenance over 70% @ 100,000+ Hours
  • Die-Cast Aluminum Housing with High Heat Transmission
  • IP68: Dustproof, Waterproof
  • Swiveling U-shaped Bracket for Ceiling or Wall Mounting
  • 120° Wide Flood Illumination
  • Meanwell HLG Driver with >90% Efficacy
  • Solid-State — High Shock & Vibration Resistant
  • No IR/UV Radiation, No RF, EMI Testing Compliance
  • Eco-Friendly — RoHS Compliant
  • LM80-Certified, High-Efficacy & High-Lumen LED Chips
  • 30+ Years LEDtronics Design & Manufacturing

Please see the series page below for more information on the available models.

Explosion & Weather-proof LED Flood Lights

WIMA extends voltage ranges for MKS 2, MKS 4 and MKP 2

WIMA metallized film capacitors have been extended by several new voltage ranges e.g. 400 VDC for WIMA MKS 02, 800 VDC for WIMA MKP 2 or 850 VDC, 1600 VDC and 2000 VDC for WIMA MKP 4. In addition to that several new capacitance values have been introduced for WIMA MKS 4 and WIMA MKP 2.

With metallized capacitors, thin layers of aluminum are vacuum-deposited on the insulating film as conducting electrodes. In the case of a breakdown, the short circuit current causes the thin metal layer to evaporate around the point of failure and an insulating area is formed. The capacitor remains intact (self-healing).

Metallized WIMA capacitors are available with Polyester or Polypropylene dielectric in PCM 2.5 mm to 52.5 mm. Capacitance values range from 100 pF to 680 µF and rated voltages from 50 VDC to 2000 VDC.

Please see the updated data tables here:

http://www.wima.com/EN/tpl_products_met_overview.htm

GEYER has improved Aging on all small Crystal models

From now on, GEYER manufactures all small crystal models with a reduced aging of maximum ± 2 ppm (aging first year). 

With this step, they consider the risen requirements regarding tight tolerance and improved long-term stability for crystals, especially for wireless applications like WLAN, Bluetooth, RFID and ISM band radio.  The improved specifications are available for all SMD Crystals in case sizes from 1.6 x 1.2 mm to 8.0 x 4.5 mm, prepared for applications for extended temperature ranges like -40 to +85°C.  These crystals conform to RoHS standards and are specified for reflow soldering in accordance with J-Std-020.

Comprehensive technical information may be obtained at GEYER’s website.

LEDtronics Ballast-Ready/Dual Mode LED Tube Lights!

LEDtronics Ballast-Ready/Dual Mode LED Tube Lights Work with or without a Ballast

LEDtronics® announces their brand new DLC-Listed LED T8 Ballast-Ready/Dual Mode Tube Lights! These unique “Dual Mode” tubes work with or without a ballast!

LEDtronics always recommends doing a simple, one-time ballast bypass when first installing our LED lighting in order to gain the true energy and money savings obtained from our superior quality products.   However, they understand the need for Ballast-Ready products. LEDtronics is the true Solutions Provider of the LED industry, so they have the answer with their LED48T8BR series “Dual Mode” LED T8 Tube Lights. There’s no need for a ballast bypass when installing! All it takes is an easy direct retrofit into an existing 4-ft Fluorescent T8 fixture with an electronic ballast, and it’s ready to go!

Adding to that, when the ballasts do go out (which they will), you can bypass the ballasts. There’s no need to purchase new ballasts!

Please read the complete product release at http://www.ledtronics.com/Media/PressReleases.aspx?pressID=363

E-Mark Offers New Through-Hole Test Points

E-Mark of Shelton, CT, known for its wide variety of both SMT and through-hole test points, is pleased to announce the expansion of their test point offering with the addition of four new through-hole PCB test points.

Used to afford secure attachment of scope probes and flying leads to PCBs these four new test points vary in height from 7.4 mm to 14 mm and all are designed to fit a 1.0 mm hole in the PCB. The smallest one is offered in a tin finish while the three larger sizes are offered in a gold finish. All four test points are RoHS compliant and lead-free.

Sold in multiples of 100 pieces they are all available from stock. Prices range from $0.11 to $0.16 each in small quantities and free samples are available to all requesting them through E-Mark’s web site or calling toll free (800) 831-5383.

You can see the datasheet at:

http://www.e-markinc.com/images/ThroughHoleTestPoints.pdf

1 10 11 12 13